Tag Archives: ironing board

Hemming Ikea Curtains

While Kay was in the army last November, I decided to spontaneously visit IKEA after work one day. It was the first time I ever went by myself. I went in search of curtains, but I may have bought a sofa as well…

OK, I did buy a sofa, and I sure hoped that Kay would like it because I forgot to ask permission before pulling the trigger! But this post is not about our Karlstad. It is about office curtains. I was sick of not having any curtains in the office or the master bath and I knew that the sheer material I bought would not be adequate for either room without some proper curtains, so I bought four sets of cheap curtains to hem: Two for each office window and four to double up for privacy in the bathroom window.

I decided to go for this red pattern in the office, to match the orange/red sofa and I was also nervous to be buying fabric without Kay. We had such a hard time deciding fabric for the living room and bedroom and we rarely make home decor decisions without each other, but he thought the fabric was fine, so I went ahead and started hemming.

A friend mentioned that I should try hanging them and basting to see if the curtains would be the proper length and then I found this tutorial for hemming IKEA curtains on Charm Stitch.

I decided to try out pinning and sewing the curtains directly at the window as the tutorial suggested, but I opted to hang the curtains up backwards so that I wouldn’t be flipping the fabric over and possibly screwing up my hem. I also had more room to work in the living room than the office, so it was easier to set up an ironing board and sewing machine out there. Since I was going to move the curtains anyway, putting them up backwards to hem and sew was not a big deal.

First I pinned and it was good to check because IKEA curtains are sewn pretty poorly and unevenly and it was necessary to adjust a lot.

Once I was happy with the hanging I lifted the curtain up on to my ironing board and ironed the hem.

Below you can see how sometimes I needed to adapt the wonky IKEA curtain to form a straighter line.

I’m not saying my line is perfect… I just tucked it in a bit so that it would appear straight from the front side of the curtain.

Once I had ironed, I would let the curtain hang and check how even it was.

Below is an example of a curtain pinned that needed reworked.

And here was the re-pinning and ironed hem.

It didn’t have to be 100% perfect for me, but close enough.

When the hem was OK I sewed in the weights at the bottom. Then I got lazy and started straight up stapling the lead weights in because I was just that lazy… and I figured that nobody is going to tell if I stapled them or sewed them, so why expend all the extra effort?

I plopped my sewing machine up on the ironing board and sewed my hems then.

Finally when the curtains were done I took them down and re-hung them in the office with the hem facing the window.

At some point I’ll take you some nice daytime pictures of the office windows. I was happy I got these done before my little sister spent the night on our sofa bed.

After the office curtains I hemmed the four bathroom curtains and layered some plain white curtains behind a patterned white curtain that wasn’t quite opaque enough on its own.

Have you got some IKEA curtains in your home? Did you have to hem them to fit in or did you leave them long?